Installation of stainless steel tee

　　To ensure that the stainless steel tee is not leaking oil, the placement requirements and detailed problems are as follows:

　　Stainless steel tee is manipulated according to the normal style and principle in the actual manipulation to ensure the quality and price type in the manipulation, and operate and install according to the normal control standard. No quality and functional problems have occurred. Stainless steel tee is not a simple mechanical component in any sense, but an internal mechanical product carrier that has collected abundant technology.

　　(1) Stainless steel tee should have sufficient strength and no deformation during fastening. The flange sealing surface should be smooth and clean, resettlement to seriously liquidate oil and rust.

　　(2) the gasket should have delicate oil and anti-aging function and good elasticity and mechanical strength. Resettlement shall be made according to the shape of the adjacent section, and the gaskets with different cross sections and dimensions shall be selected and settled.

　　(3) Stainless steel tee fastening stress average system, pad compression should be controlled in 1/3 left.