Welding deformation principle of large threaded flange

Views : 596
Author : admin
Update time : 2020-03-18 14:37:32

  According to the principle of deformation during welding of large threaded flange, the influence of welding skill on transverse shortening is analyzed by using low carbon steel and full specification stainless steel. The welding method of selecting section back welding, adding short section or selecting upper thin and lower thick ANSI B16.5 Class 600 Stainless Steel Threaded Flange is put forward. Add sealing points between two threaded flange, and then fasten them with bolts. The first standards are national standards, electric standards, American standards, German standards, Japanese standards, etc.

  Attention should be paid to improving the working environment of hot forging. Always adhere to the dryness and ventilation of stainless steel large threaded flange, adhere to the cleaning and tidiness of the device, and store it in accordance with the correct storage method. The value in brackets indicates the allowable wall thickness error value of the same large threaded flange on different sections. The distance between the two sections is not more than twice the pipe diameter, and the maximum is not more than 300 mm.

  Forged large threaded flange connection is easy to use and can bear large pressure. Butt welding is adopted for the connection of large threaded flange and pipeline. The welding seam is similar to the welding of pipeline and pipeline. Generally, argon arc welding is adopted for the small pipe diameter, and double-sided welding is adopted for the large pipe diameter.

Related News
Read More >>
Calculation method of pipe fitting elbow geometric dimensions Calculation method of pipe fitting elbow geometric dimensions
Mar .29.2024
ASME B16.9 ASME A234 WPB SMLS LR 90 Degree Pipe Fitting Elbow is a commonly used connecting pipe fitting in installation. It is used to connect pipe corners and change the direction of steel pipes.
Application of stainless steel pipe caps Application of stainless steel pipe caps
Mar .26.2024
Hebei Shengtian Pipe Fittings Group Co., Ltd. is a manufacturer specializing in the production of ASTM B16.9 ASTM A403 WP 316 Buttweld Stainless Steel End Caps.
The ASME B16.9 Buttweld CS Pipe Fitting Eccentric Reducer has been sent to Germany The ASME B16.9 Buttweld CS Pipe Fitting Eccentric Reducer has been sent to Germany
Mar .21.2024
Hebei Shengtian Pipe Fittings Group Co., Ltd. will check every order at all levels before delivering high-quality pipe fittings to customers. Shengtian Group firmly believes that only quality first can it serve every customer well.
Pipe fitting tee implementation standards and precautions Pipe fitting tee implementation standards and precautions
Mar .19.2024
2 Inch ASTM A234 WPB Carbon Steel Seamless Equal Tee is a pipe connection that can be used to connect and distribute media