Carbon Steel Reducer

Item No.: 003
A reducer allows for ​change in pipe size to meet hydraulic flow requirements of the system or adapt to existing piping of a different size.The reducers are usually concentric or eccentric.
Description

  Standards

  ASME B16.9-2007

  ASME B16.25-2007

  ASME B16.5-2007

  EN10253-1-1999 EN10253-2-2007 EN10253-3-2008 EN10253-4-2008

  DIN2605-1-1992 DIN2605-2-1995

  JIS B2311-2009 JIS B2312-2009 JIS B2313-2009

  GB/T12459-2005 GB/T13401-2005 GB/T10752-2005

  SH/T3408-1996 SH/T3409-1996

  SY/T0609-2006 SY/T0518-2002 SY/T0510-1998

  DL/T695-1999 GD2000 GD87-1101

  HG/T21635-1987 HG/T21631-1990

  Size

  Size:1/2"~24" DN15~DN600

  Wall Thinkness

  sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100,

  sch120, sch140, sch160, xxs, std,sch5s, sch20s, sch40s, sch80s

  Maximum thickness: 120mm

  Materials

  Carbon steel: ASTM/ASME A234 WPB、WPC

  Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911

  Stanless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N

  ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti

  ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H

  Low-temperature steel:ASTM/ASME A402 WPL 3-WPL 6

  High performance: ASTM/ASME A860 WPHY 42-46-52-60-65-70

SHENGTIAN GLOBAL