| Size: | DN10-DN800 | Category: | 1",1/2",3/4" Centrifugal Pump Flange |
|---|---|---|---|
| Type: | Socket Weld Flange | Pressure: | 150#-2500# |
| Material: | Stainless Steel,Alloy Steel Flange | Connection: | Welding |
| Brand: | ST | Place Of Origin: | China |
| High Light: |
DIN Stainless Steel 316l FlangesDIN Socket Weld Pipe FlangesDN800 Socket Weld Pipe Flanges |
||
DIN Forged Stainless Steel 316l Fitting Socket Weld Pipe Flanges
| Product Name | DIN Forged Stainless Steel 316l Fitting DN800 Socket Weld Pipe Flanges | |
| Items | Plate, Welding Neck, Slip on, Blind, Socket Welding, Lap joint, Threaded Flange etc. | |
| Standard | ANSI | ANSI B16.5, ASME B16.47 series A/B |
| DIN | Germany 6bar, 10bar, 16bar, 25bar, 40bar | |
| GOST | GOST 12820/12821/12836 | |
| EN1092-1 | EN1092-01/05/11/12/13 | |
| JIS | JIS B 2220-1984, KS B1503, JIS B 2216 | |
| BS4504 | BS4504 BS10 Table D/E | |
| Material | ANSI | CS A105, S235, Steel 20; SS 304/304L, 316/316L |
| DIN | CS RST37.2, S235JRG, P245GH, P250GH; SS 304/304L, 316/316L | |
| GOST | CS Steel 20, 16MN, Q235 | |
| EN1092-1 | CS RST37.2, S235JRG, C22.8 | |
| JIS | SS400, SS 304/304L, 316/316L | |
| BS4504 | CS RST37.2, S235JRG, C22.8; SS 304/304L, 316/316L | |
| Pressure | ANSI | Class 150, 300, 600, 900, 1500, 2500lbs |
| DIN | PN6, PN10, PN16, PN25, PN40 | |
| GOST | PN6, PN10, PN16, PN25, PN40, PN63, PN100 | |
| EN1092-1 | PN6, PN10, PN16, PN25, PN40, PN63, PN100 | |
| JIS | 5K, 10K, 16K, 20K, 30K, 40K | |
| BS4504 | PN6, PN10, PN16, PN25, PN40 | |
| Size | ANSI | 1/2" - 80" |
| DIN | DN15-DN2000 | |
| GOST | DN15-DN1600 | |
| EN1092-1 | DN15-DN2000 | |
| JIS | 15A-1500A | |
| BS4504 | DN15-DN2000 | |
| Chemical Composition(%) | |||||||||||
| Grade | C | Si | Mn | P | S | Cr | Ni | Mo | N | Cu | |
| 201 | ≤0.15 | ≤0.75 | 5.5~7.5 | ≤0.060 | ≤0.03 | 16.00~18.00 | 3.5~5.5 | - | - | 0.08 | 1.5 |
| 202 | ≤0.15 | ≤1.00 | 7.5~10.00 | ≤0.060 | ≤0.03 | 17.00~19.00 | 4.0~6.0 | - | ≤0.25 | ||
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 6.00~8.00 | - | |||
| 302 | ≤0.15 | ≤1.00 | ≤2.00 | ≤0.035 | ≤0.03 | 17.00~19.00 | 8.00~10.00 | - | |||
| 304 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 8.00~10.50 | - | |||
| 304L | ≤0.030 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 18.00~20.00 | 9.00~13.00 | - | |||
| 310S | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 24.00~26.00 | 19.00~22.00 | - | |||
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | |||
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 16.00~18.00 | 12.00~15.00 | 2.00~3.00 | |||
| 321 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 17.00~19.00 | 9.00~13.00 | - | |||
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00~18.00 |
|
- | |||
| 2205 | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.015 | 22.00~23.00 | 4.5~6.5 | 2.5~3.5 | |||
| 2507 | ≤0.03 | ≤0.08 | ≤1.20 | ≤0.035 | ≤0.015 | 24.00~26.00 | 6.00~8.00 | 3.0~5.0 | |||
| 904L | ≤0.02 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.035 | 19.00~23.00 | 23.00~28.00 | 4.0~5.0 | 1.0~2.0 | ||
|
INCONEL 028 |
≤0.03 | ≤1.00 | ≤2.50 | ≤0.030 | ≤0.030 | ≤28.0 | ≤34.0 | ≤4.0 | ≤1.4 | ||
|
MONEL 400 |
≤0.30 | ≤0.5 | ≤2.00 | - | ≤0.024 | - | ≥63.0 | - | ≤34.0 | ||
|
INCONEL 800 |
≤0.10 | ≤1.00 | ≤1.50 | - | ≤0.015 | ≤23.0 | ≤35 | 4.0~5.0 | - | ≤0.75 |
Ti≤0.6 Al≤0.6 |
Have you met tube edge deformation and tube bending problems after getting the goods ?
We give complete and several times of correcting for each tube with particular equipment during production, as well as proper packing to avoid edge deformation or bending before delivery.
Have you got the problems from unacceptable tolerance when you are checking the stainless steel pipes from your previous supplier ?
With our tolerance control machine equipments, strict inspection process has been proceeded to make sure our stainless steel pipes produced and finished by all standards of ASTM, EN, JIS etc.
Have you ever met defective and such a bad surface finish ?
There must be complete pickling process given during our stainless steel pipes' production. And we also provide stainless steel pipe surface treatment requirement from our clients, such as polishing, grinding,hairline etc.
PROCESS OF STAINLESS STEEL PIPE
We have first-class inspection devices, perfect detecting means and well-trained specialists. And we stick to ISO9000:2000 quality system and efficiently control procedure in production. We have confidence that we can supply the best quality products. We would like to take responsibility for any quality uncertainty. Even so, our price is competitive. Besides, we can provide the best service to you.
In order to avoid the policy of the anti-dumping duties imposed on pipe & fittings from the Europe, United States and other countries, We can re-export through other countries like Malaysia, etc, to circumvent the anti-dumping duties, which could make you to win more competitive price.
Our products are in compliance with many international standards
