2.0mm ANSI B16.9 Pipe Fitting Carbon Steel Bend

Item No.: 00243
2.0mm ANSI B16.9 Pipe Fitting Carbon Steel Bend
Description
Description
2.0mm ANSI B16.9 Pipe Fitting Carbon Steel Bend
Description

 
Bend Angle: 30 ; 45 ; 60 ; 90 ; 120; 180 ; Ect Port: Tianjin
Bending Radius: 3D, 4D, 5D, 6D, 7D, 8d, 9d, 10d Transport Package: Standard Sea-Worthy Package
Standards: ASME/DIN/EN/ASME B16.9 Wall Thickness: 1.5 Mm / 2.0 Mm / 3.0 Mm
High Light:

ANSI B16.9 2.0mm Pipe Fitting Bend
2.0mm Pipe Fitting Bend
2.0mm B16.9 Steel Pipe Bend

 

ANSI B16.9 Carbon Steel Stainless Steel Buttweld Seamless Pipe Fitting Bend Specification

 

Pipe Fitting Bend Size

Seamless Pipe Bend: 1/2" - 10"

WPB Welded Pipe Bend: 1/2" - 48"

Pipe Fitting Bend Dimensions

ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10

Pipe Fitting Bend 

Thickness

SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160

Pipe Fitting Bend Radius

R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom WPB Carbon Steel Bends

Pipe Fitting Bend Angle

22.5 deg, 30deg, 45 deg, 90 deg, 180 deg

Pipe Fitting Bend 

Standard

ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO

Pipe Fitting Bend Process

Push, Press, Forge, Cast, etc.

 

The difference between Pipe Fitting Bend and elbow

 

  Bend is a generic term for any offset or change of direction in the piping. It is a vague term that also includes elbows. An elbow is an engineering term and they are classified as 90 deg or 45 deg, short or long radius. Elbows have industrial standards and have limitations to size, bend radius and angle.

  Pipe elbows and pipe fitting bends are both very common pipe fittings products which are used to change the flowing direction in a piping systems.Some times they are interchangeable,but not same.

  A pipe fitting bend means a piece of pipe which are bent to some angle to join two pipings.They can be nearly any bending radius and angles.Pipe Fitting bends are commonly produced on site to meet a specific need by hot induction bending or cold bending.A elbow means a specific pipe fitting bend as per the standard ANSI/ASME B16.9 (or EN 10253,or other pipe fittings standards).Commonly the elbows have a bending radius of 1.5D or 1D (Here the D means nominal diameter of this bend),which are called “Long Radius elbow (LR elbow)” or “Short Radius elbow(SR elbow)“.And the angle of an elbow is 45 degree or 90 degree usually,some times there are also custom-designed elbows which are 30 degree,60 degree,180 degree or other angles.

 

ANSI B16.9 Carbon Steel Stainless Steel Buttweld Seamless Pipe Fitting Bend Size

 

Size(in.) PressureRating T(in.) Short Radius Long Radius
  (psi)   A(in.) R(in.) Weight(lbs.) B(in.) R(in.) Weight(lbs.)
     
4 250 0.52 6.5 4.5 40 9 7 50
6 250 0.55 8 6 65 11.5 9.5 80
8 250 0.6 9 7 105 14 12 140
10 250 0.68 11 9 165 16.5 14.5 215
12 250 0.75 12 10 240 19 17 325
14 250 0.66 14 11.5 290 21.5 19 385
16 250 0.7 15 12.5 370 24 21.5 505
18 250 0.75 16.5 14 450 26.5 24 630
20 250 0.8 18 15.5 575 29 26.5 810
24 250 0.89 22 18.5 900 34 30.5 1240
30 250 1.03 25 21.5 1430 41.5 38 2105
36 250 1.15 28 24.5 2135 49 45.5 3285
42 250 1.28 31 27.5 3055 56.5 53 4865
48 250 1.42 34 30.5 4090 64 60.5 6790
54 250 0.9 39 34.3 3740 - - -
60 250 0.94 43 36.5 4965 - - -
64 250 0.99 48 38.8 6745 - - -
Send your message to us
ver_code