Four quality inspection aspects of pipe fitting elbow

Views : 1281
Update time : 2020-08-19 10:43:26

  The carbon steel pipe fitting elbow must be inspected at the welded joint, which is also an important measure to ensure the welding quality. When the carbon steel pipe fitting elbow is finished, the weld is tested according to the technical requirements of the product. If the defect is not in conformity with the technical requirements, it should be repaired in time (if the serious unqualified can not be repaired directly). The common inspection of carbon steel pipe fitting elbow quality includes three aspects: appearance inspection, NDT and mechanical performance test. These three are complementary to each other, among which NDT is the main one.

  1, appearance check: generally observe with the naked eye, sometimes observe with 5-20 times magnifying glass. Surface defects can be found through weld inspection.

  2. NDT: detect defects such as slag, blowholes and cracks hidden inside the weld. At present, the most commonly used are X ray inspection, ultrasonic testing and magnetic flaw detection. X ray inspection is the use of X ray for weld photography, according to the film image to determine whether there are defects, defects and types.

  3, hydraulic test and pressure test: for pressurized containers requiring sealing, pressure tests and air pressure tests should be carried out to check the sealing and pressure capacity of the weld.

  4. Mechanical performance test of elbow: nondestructive flaw detection can detect inherent defects of weld, but it can not explain the mechanical properties of metal in weld heat affected zone.

Related News
Read More >>
DIN 2576 PN10 Slip On Flange Dimensions DIN 2576 PN10 Slip On Flange Dimensions
Nov .19.2026
DIN 2576 PN10 slip on flange is one of our core forged products at Hebei Shengtian Pipe-fitting Group. Fabricated to DIN 2576 specification, this slip-on flange is rated PN10, ideal for low-pressure piping connections.
DIN 2573 PN6 Slip On Flange Dimensions DIN 2573 PN6 Slip On Flange Dimensions
Nov .17.2026
DIN 2573 PN6 Slip On Flange is a popular slip-on plate flange following the DIN 2573 standard for low-pressure piping applications, rated for a nominal working pressure of 6 bar.
DIN 2545 PN40 Slip On Flange Dimensions DIN 2545 PN40 Slip On Flange Dimensions
Nov .12.2026
Hebei Shengtian Pipe Fittings Group Co., Ltd. supplies premium DIN 2545 PN40 Slip On Flanges
DIN 2544 PN25 Slip On Flange Dimensions DIN 2544 PN25 Slip On Flange Dimensions
Nov .10.2026
DIN 2544 specifies slip-on flanges rated at PN 25 .Covers sizes DN 10 to DN 1000.The flanges with the dimensions of this standard can be used at maximum 120°C temperature with up to 25 bar of working pressure.