The weight of ASME B16.9 DN100 Butter Weld Pipe Fitting End Caps can be calculated using the following formula:
Weight of a single Butter Weld Pipe Fitting End Cap (kg)=0.02466 x (D ^ 2- d ^ 2) x L x ρ
Among them:
D represents the pipe diameter, in millimeters (mm).
D represents the caliber, in millimeters (mm).
L represents the length of the pipe cap, in meters (m).
ρ Represents the density of carbon steel, in kilograms per cubic meter (kg/m ³)。
For example, if it is necessary to calculate the weight of a Butter Weld Pipe Fitting End Cap with an outer diameter of 219mm, a wall thickness of 6mm, and a length of 3m, the above formula can be used for calculation:
W=(219-6) x 6 x 0.02466 x 3=31.71kg
It should be noted that this formula is based on metric units. If you need to calculate the weight of the pipe cap in English units, you may need to convert it through a conversion formula. In addition, the calculated results are theoretical values and may have some error with the actual weight, which needs to be adjusted according to the actual situation