How to install pipe fitting reducer?

Views : 1541
Update time : 2020-08-18 14:09:38

  Pipe fitting reducer is one of the most widely used pipe fittings, which plays a connecting role. The following points should be paid attention to during installation:

  1. Draw the side projection of the pipe fitting reducer according to the actual size. Including stitching. Each closed wireframe figure is divided into independent graphics by line. Take a pattern and draw it on another piece of paper. Draw two parallel horizontal lines along the height of the pattern and perpendicular to the center line. The length is exactly the circumference of the diameter of the pattern.

  2. Divide the vertical direction of the drawing equally and mark it. Then draw these bisectors vertically into the expanded rectangle drawn just now. Note that the points on the expanded drawing must correspond to the points on the projection drawing.

  3. Divide the diagonal lines in the drawing horizontally. And parallel pull to the expanded pattern, and corresponding points. Connecting the intersection points obtained from the expanded sample smoothly is the expanded curve.

Related News
Read More >>
DIN 2576 PN10 Slip On Flange Dimensions DIN 2576 PN10 Slip On Flange Dimensions
Nov .19.2026
DIN 2576 PN10 slip on flange is one of our core forged products at Hebei Shengtian Pipe-fitting Group. Fabricated to DIN 2576 specification, this slip-on flange is rated PN10, ideal for low-pressure piping connections.
DIN 2573 PN6 Slip On Flange Dimensions DIN 2573 PN6 Slip On Flange Dimensions
Nov .17.2026
DIN 2573 PN6 Slip On Flange is a popular slip-on plate flange following the DIN 2573 standard for low-pressure piping applications, rated for a nominal working pressure of 6 bar.
DIN 2545 PN40 Slip On Flange Dimensions DIN 2545 PN40 Slip On Flange Dimensions
Nov .12.2026
Hebei Shengtian Pipe Fittings Group Co., Ltd. supplies premium DIN 2545 PN40 Slip On Flanges
DIN 2544 PN25 Slip On Flange Dimensions DIN 2544 PN25 Slip On Flange Dimensions
Nov .10.2026
DIN 2544 specifies slip-on flanges rated at PN 25 .Covers sizes DN 10 to DN 1000.The flanges with the dimensions of this standard can be used at maximum 120°C temperature with up to 25 bar of working pressure.