Welcome to Shengtian!
Call Us

Company News Home > News > Company News

Hot press forming of stainless steel tee

Views : 96
Update time : 2020-08-18 14:24:23

  Hot press forming of stainless steel tee is to flatten the tube blank larger than the stainless steel tee diameter to the size of stainless steel tee diameter, and open a hole at the position of drawing branch pipe; the tube blank is heated, put into the forming die, and put into the stamping die of drawing branch pipe; under the effect of pressure, the tube blank is compressed radially, in the process of radial compression, the metal flows towards the stainless steel tee and forms the branch pipe under the drawing of the stamping die.

  The whole process is formed by the radial compression of the tube blank and the drawing of the branch pipe. Different from the hydraulic expansion stainless steel tee, the metal of hot pressed stainless steel tee is compensated by the radial movement of tube blank, so it is also called radial compensation process.

  Due to the use of heating and pressing stainless steel tee, the tonnage of equipment required for material forming is reduced. Hot pressed stainless steel tee has wide adaptability to materials, which is suitable for low-carbon steel, alloy steel and stainless steel; especially for large-diameter and thick pipe wall stainless steel tee, this forming process is usually adopted.