What details should be noted when using ASME B16.9 Pipe Fitting SCH 40 BW Carbon Steel Cap?

　　ASME B16.9 Pipe Fitting SCH 40 BW Carbon Steel Cap is a type of pipe fitting cap when used. Mainly used for sealing steel pipes during use. For example, steel pipes are hot and cold, and can be used as plugs. For containers, pipe fitting caps can be welded at both ends of the steel pipe.

　　People use carbon steel pipe fitting caps mainly in the hope that they can maintain the original appearance of the building and provide long-term effective maintenance. Therefore, when choosing which type of carbon steel pipe fitting cap to use, it is necessary to determine the type of pipe fitting cap. The main considerations are these aspects. One is from an aesthetic perspective, the second is to consider the environment in which the parts are located, and the third is to use cleaning methods when using.

　　Attention should be paid to the direction of use of carbon steel pipe fitting caps.

　　Measure the outer circumference of the pipe fitting cap;

　　Divide the outer circumference of the tested pipe fitting cap into 4 equal parts and mark them on the cylinder and pipe fitting cap;

　　Positioning welding refers to the selection of welding positioning points between the pipe fitting cap and the steel pipe, mainly based on the specific diameter and thickness of the plate.

　　After the above positioning welding is completed, we can re weld it.

　　Carbon steel pipe fitting cap is the end cover on pressure vessels and is the main pressure bearing component of pressure vessels. The function is sealing. One is to make the top and bottom of the can shaped pressure vessel connected, and the other is to make the pipes connected. If not intended to extend forward, use a pipe cap to seal the pipeline by welding. Similar products to bottle caps include blind plates and bottle caps, but these two products are detachable. After welding the cover, it cannot be removed.