EN1092 PN2.5 flange specifications cover nominal pipe sizes from 10mm (3/8") to 600mm (24"). The table includes flange outside diameters ranging from 75mm to 755mm, with thicknesses from 12mm to 32mm. Available in plate slip-on, blind, and weld neck configurations, with pitch circle diameters from 50mm to 705mm. Bolt hole diameters range from 11mm to 26mm, with 4 to 20 bolt holes depending on size.

| DN | Outside Diamete, D | Diameter of Bolt Circle, K | Dia of Bolt Hole, L | No. of bolt | Size of Bolt | Flange thickness, C | Diameter of Raised Face, d | Height of Raised Face, f1 |
| 10 | 75 | 50 | 11 | 4 | M10 | 12 | 35 | 2 |
| 15 | 80 | 55 | 11 | 4 | M10 | 12 | 40 | 2 |
| 20 | 90 | 65 | 11 | 4 | M10 | 14 | 50 | 2 |
| 25 | 100 | 75 | 11 | 4 | M10 | 14 | 60 | 2 |
| 32 | 120 | 90 | 14 | 4 | M12 | 14 | 70 | 2 |
| 40 | 130 | 100 | 14 | 4 | M12 | 14 | 80 | 3 |
| 50 | 140 | 110 | 14 | 4 | M12 | 14 | 90 | 3 |
| 65 | 160 | 130 | 14 | 4 | M12 | 14 | 110 | 3 |
| 80 | 190 | 150 | 18 | 4 | M16 | 16 | 128 | 3 |
| 100 | 210 | 170 | 18 | 4 | M16 | 16 | 148 | 3 |
| 125 | 240 | 200 | 18 | 8 | M16 | 18 | 178 | 3 |
| 150 | 265 | 225 | 18 | 8 | M16 | 18 | 202 | 3 |
| 200 | 320 | 280 | 18 | 8 | M16 | 20 | 258 | 3 |
| 250 | 375 | 335 | 18 | 12 | M16 | 22 | 312 | 3 |
| 300 | 440 | 395 | 22 | 12 | M20 | 22 | 365 | 4 |
| 350 | 490 | 445 | 22 | 12 | M20 | 22 | 415 | 4 |
| 400 | 540 | 495 | 22 | 16 | M20 | 22 | 455 | 4 |
| 450 | 595 | 550 | 22 | 16 | M20 | 24 | 520 | 4 |
| 500 | 645 | 600 | 22 | 20 | M20 | 24 | 570 | 4 |
| 600 | 755 | 705 | 26 | 20 | M24 | 30 | 670 | 5 |
| 700 | 860 | 810 | 26 | 24 | M24 | 40 | 775 | 5 |
| 800 | 975 | 920 | 30 | 24 | M27 | 44 | 880 | 5 |
| 900 | 1075 | 1020 | 30 | 24 | M27 | 48 | 980 | 5 |
| 1000 | 1175 | 1120 | 30 | 28 | M27 | 52 | 1080 | 5 |
| 1200 | 1375 | 1320 | 30 | 32 | M27 | 50 | 1280 | 5 |
| 1400 | 1575 | 1520 | 30 | 36 | M27 | 57 | 1480 | 5 |
| 1600 | 1790 | 1730 | 30 | 40 | M27 | 64 | 1690 | 5 |
| 1800 | 1990 | 1930 | 30 | 44 | M27 | 70 | 1890 | 5 |
| 2000 | 2190 | 2130 | 30 | 48 | M27 | 78 | 2090 | 5 |
EN 1092-1 PN 25 Blind flanges are used to seal the end of a piping system or pressure vessel openings to prevent flow.EN 1092-1 PN 25 Blind flanges are mainly used for pressure testing the flow of liquid or gas through a pipe or vessel. These flanges also allow easy access to the pipe in the event that work must be done inside the line.
DIN 2576 PN10 Slip On Flange Dimensions
DIN 2573 PN6 Slip On Flange Dimensions
DIN 2545 PN40 Slip On Flange Dimensions
DIN 2544 PN25 Slip On Flange Dimensions