Features of stainless steel tee

Views : 594
Author : admin
Update time : 2020-05-08 14:37:54

  Introduction to stainless steel tee:

  1. Start the arc on the groove surface, and immediately retreat to the initial welding point at the slope root (usually 10 mm before the 6 o'clock position). When you see the start of melting, rapidly add the welding wire, so that the welding wire and the base metal are fused together, then you can see that the molten liquid and the slag flow evenly through the groove to the pipe to form a melting hole; ANSI B16.9 Stainless Steel 304 Pipe Fitting Tee makes a small zigzag swing, slightly faster upward movement, and the welding wire is always not separated from the argon Gas protection shall be pasted on the gap between the blunt edges of the groove, and the intermittent wire feeding method shall be adopted, with one pulling one feeding and one dropping one feeding to the molten pool.

  2. During the welding process, short arc operation shall be maintained; handle shall be stable, wire feeding shall be clean, pay attention to the spacing between welding wire and tungsten electrode to prevent "tungsten striking", otherwise, new welding shall be carried out after grinding.

  3. The stainless steel tee control the size of the weld hole and the same shape is the key to the double-sided forming of backing welding.

  4. In the process of backing welding, the welding wire should be melted evenly, and a thin layer of slag should be formed to penetrate into the pipe mouth evenly, so as to protect the welding seam with slag, which is why the flux welding wire is used.

  5. After the stainless steel tee is welded, hammering shall be carried out to make the welding slag fall off; compressed air or water flushing can also be used to drop the welding slag in the pipe, so as to obtain beautiful golden weld in the pipe.

Related News
Read More >>
Application of stainless steel pipe caps Application of stainless steel pipe caps
Mar .26.2024
Hebei Shengtian Pipe Fittings Group Co., Ltd. is a manufacturer specializing in the production of ASTM B16.9 ASTM A403 WP 316 Buttweld Stainless Steel End Caps.
The ASME B16.9 Buttweld CS Pipe Fitting Eccentric Reducer has been sent to Germany The ASME B16.9 Buttweld CS Pipe Fitting Eccentric Reducer has been sent to Germany
Mar .21.2024
Hebei Shengtian Pipe Fittings Group Co., Ltd. will check every order at all levels before delivering high-quality pipe fittings to customers. Shengtian Group firmly believes that only quality first can it serve every customer well.
Pipe fitting tee implementation standards and precautions Pipe fitting tee implementation standards and precautions
Mar .19.2024
2 Inch ASTM A234 WPB Carbon Steel Seamless Equal Tee is a pipe connection that can be used to connect and distribute media
A batch of ASTM A234 WPB 22.5 Degree SCH 40 LR Pipe Fitting Elbow goes to Brazil A batch of ASTM A234 WPB 22.5 Degree SCH 40 LR Pipe Fitting Elbow goes to Brazil
Mar .14.2024
Our old Brazilian customer ordered a batch of ASTM A234 WPB 22.5 Degree SCH 40 LR Pipe Fitting Elbows in the middle of last month. The production has been completed and packed and ready to be sent to the port.