Installation of Stainless Steel Tee

Views : 1270
Update time : 2020-09-28 15:29:43

  To ensure that the stainless steel tee is not leaking oil, the placement requirements and detailed problems are as follows:

  Stainless steel tee is manipulated according to the normal style and principle in the actual manipulation to ensure the quality and price type in the manipulation, and operate and install according to the normal control standard. No quality and functional problems have occurred.Stainless steel tee is not a simple mechanical component in any sense, but an internal mechanical product carrier that has collected abundant technology.

  (1) Stainless steel tees should have sufficient strength and no deformation during fastening. The flange sealing surface should be smooth and clean, resettlement to seriously liquidate oil and rust.

  (2) the gasket should have delicate oil and anti-aging function and good elasticity and mechanical strength. Resettlement shall be made according to the shape of the adjacent section, and the gaskets with different cross sections and dimensions shall be selected and settled.

  (3) Stainless steel tee fastening stress average system, pad compression should be controlled in 1/3 left.

Related News
Read More >>
DIN 2576 PN10 Slip On Flange Dimensions DIN 2576 PN10 Slip On Flange Dimensions
Nov .19.2026
DIN 2576 PN10 slip on flange is one of our core forged products at Hebei Shengtian Pipe-fitting Group. Fabricated to DIN 2576 specification, this slip-on flange is rated PN10, ideal for low-pressure piping connections.
DIN 2573 PN6 Slip On Flange Dimensions DIN 2573 PN6 Slip On Flange Dimensions
Nov .17.2026
DIN 2573 PN6 Slip On Flange is a popular slip-on plate flange following the DIN 2573 standard for low-pressure piping applications, rated for a nominal working pressure of 6 bar.
DIN 2545 PN40 Slip On Flange Dimensions DIN 2545 PN40 Slip On Flange Dimensions
Nov .12.2026
Hebei Shengtian Pipe Fittings Group Co., Ltd. supplies premium DIN 2545 PN40 Slip On Flanges
DIN 2544 PN25 Slip On Flange Dimensions DIN 2544 PN25 Slip On Flange Dimensions
Nov .10.2026
DIN 2544 specifies slip-on flanges rated at PN 25 .Covers sizes DN 10 to DN 1000.The flanges with the dimensions of this standard can be used at maximum 120°C temperature with up to 25 bar of working pressure.