What should be paid attention to when welding carbon steel tee

Views : 1357
Update time : 2020-08-18 10:58:52

  Carbon steel tee can shorten the manufacturing cycle and greatly reduce the production cost. Because no special equipment is needed, it is especially suitable for processing large carbon steel tee on site. The blank is flat plate or developable curved surface, so the blanking is simple, the accuracy is easy to ensure, and the assembly and welding are convenient.

  Precautions for carbon steel tee welding:

  1. In order to prevent the corrosion between the eyes of carbon steel tee due to heating, the welding current should not be too large, about 20% less than that of carbon steel tee electrode, the arc should not be too long, and the interlayer cooling should be fast, and the narrow welding pass is suitable.

  2. Carbon steel tee after welding hardening is bigger, easy to produce cracks. If the same type of carbon steel tee is used for welding, it is necessary to conduct preheating above 300 ℃ and slow cooling treatment about 700 ℃ after welding. If the weldment cannot be post weld heat treated. Carbon steel tee welding rod shall be choose.

  Carbon steel tee has certain corrosion resistance, heat resistance and wear resistance. It is usually used in oil, natural gas, chemical industry, hydropower, construction and boiler industries.

Related News
Read More >>
DIN 2576 PN10 Slip On Flange Dimensions DIN 2576 PN10 Slip On Flange Dimensions
Nov .19.2026
DIN 2576 PN10 slip on flange is one of our core forged products at Hebei Shengtian Pipe-fitting Group. Fabricated to DIN 2576 specification, this slip-on flange is rated PN10, ideal for low-pressure piping connections.
DIN 2573 PN6 Slip On Flange Dimensions DIN 2573 PN6 Slip On Flange Dimensions
Nov .17.2026
DIN 2573 PN6 Slip On Flange is a popular slip-on plate flange following the DIN 2573 standard for low-pressure piping applications, rated for a nominal working pressure of 6 bar.
DIN 2545 PN40 Slip On Flange Dimensions DIN 2545 PN40 Slip On Flange Dimensions
Nov .12.2026
Hebei Shengtian Pipe Fittings Group Co., Ltd. supplies premium DIN 2545 PN40 Slip On Flanges
DIN 2544 PN25 Slip On Flange Dimensions DIN 2544 PN25 Slip On Flange Dimensions
Nov .10.2026
DIN 2544 specifies slip-on flanges rated at PN 25 .Covers sizes DN 10 to DN 1000.The flanges with the dimensions of this standard can be used at maximum 120°C temperature with up to 25 bar of working pressure.