How to choose stainless steel weld neck flange material

Views : 432
Update time : 2020-09-17 09:58:46

  It is mainly used in food industry and surgical equipment, adding molybdenum to obtain a special corrosion-resistant structure. Because of its better chloride corrosion resistance than 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery devices. Grade 18/10 stainless steel usually also meets this application level.

  In order to save stainless steel, the welding ring is adopted. The structure must be machined after the welding ring and nozzle are welded. Generally used below the operating pressure of 2.5MPa. Smooth surface weld neck flange, due to poor connection rigidity, sealing performance is not good, so toxic and flammable explosive medium air tightness requirements of high equipment should not be used.

  The connection plate of this structure is made of carbon steel or stainless steel. If carbon steel is used, the surface needs to be nickel plated. The clamp material is made of cast aluminum ZL7. The sealing roughness of the connection plate is 20, and there is no obvious radial groove and notch.

Related News
Read More >>
Application of stainless steel pipe caps Application of stainless steel pipe caps
Mar .26.2024
Hebei Shengtian Pipe Fittings Group Co., Ltd. is a manufacturer specializing in the production of ASTM B16.9 ASTM A403 WP 316 Buttweld Stainless Steel End Caps.
The ASME B16.9 Buttweld CS Pipe Fitting Eccentric Reducer has been sent to Germany The ASME B16.9 Buttweld CS Pipe Fitting Eccentric Reducer has been sent to Germany
Mar .21.2024
Hebei Shengtian Pipe Fittings Group Co., Ltd. will check every order at all levels before delivering high-quality pipe fittings to customers. Shengtian Group firmly believes that only quality first can it serve every customer well.
Pipe fitting tee implementation standards and precautions Pipe fitting tee implementation standards and precautions
Mar .19.2024
2 Inch ASTM A234 WPB Carbon Steel Seamless Equal Tee is a pipe connection that can be used to connect and distribute media
A batch of ASTM A234 WPB 22.5 Degree SCH 40 LR Pipe Fitting Elbow goes to Brazil A batch of ASTM A234 WPB 22.5 Degree SCH 40 LR Pipe Fitting Elbow goes to Brazil
Mar .14.2024
Our old Brazilian customer ordered a batch of ASTM A234 WPB 22.5 Degree SCH 40 LR Pipe Fitting Elbows in the middle of last month. The production has been completed and packed and ready to be sent to the port.