The characteristics and industrial process of stainless steel tees

Views : 1788
Update time : 2020-09-18 14:18:45

  The stainless steel tee is a kind of pipe fitting used for the branch of pipeline. Seamless pipe is used to make three links. At present, there are two kinds of technology commonly used: hydraulic bulging and hot pressing. Hot pressing forming:stainless steel tee through hot forming of stainless steel is a tube billet larger than three through diameter, compressed into a diameter of about stainless steel tee through a hole in the part of a stretch branch; the tube is heated and placed in a forming die and loaded into a drawing die; the tube is compressed in radial direction and compressed in radial direction under the action of pressure. In the process, the metal flows to the branch pipe and forms a branch pipe under the stretching of the die.

  The whole process is formed by the radial compression of the billet and the drawing process of the branch. Unlike the hydraulic bulging stainless steel tee, the metal of the hot-pressed stainless steel tee branch is compensated by the radial motion of the billet, so it is also called the radial compensation process. Due to the use of heating to suppress three passes, the equipment tonnage required for material forming is reduced. Hot press stainless steel tee pass is suitable for low carbon steel, alloy steel and stainless steel, especially for large diameter and thick wall stainless steel tee, usually used in this forming process.

Related News
Read More >>
DIN 2576 PN10 Slip On Flange Dimensions DIN 2576 PN10 Slip On Flange Dimensions
Nov .19.2026
DIN 2576 PN10 slip on flange is one of our core forged products at Hebei Shengtian Pipe-fitting Group. Fabricated to DIN 2576 specification, this slip-on flange is rated PN10, ideal for low-pressure piping connections.
DIN 2573 PN6 Slip On Flange Dimensions DIN 2573 PN6 Slip On Flange Dimensions
Nov .17.2026
DIN 2573 PN6 Slip On Flange is a popular slip-on plate flange following the DIN 2573 standard for low-pressure piping applications, rated for a nominal working pressure of 6 bar.
DIN 2545 PN40 Slip On Flange Dimensions DIN 2545 PN40 Slip On Flange Dimensions
Nov .12.2026
Hebei Shengtian Pipe Fittings Group Co., Ltd. supplies premium DIN 2545 PN40 Slip On Flanges
DIN 2544 PN25 Slip On Flange Dimensions DIN 2544 PN25 Slip On Flange Dimensions
Nov .10.2026
DIN 2544 specifies slip-on flanges rated at PN 25 .Covers sizes DN 10 to DN 1000.The flanges with the dimensions of this standard can be used at maximum 120°C temperature with up to 25 bar of working pressure.