Knowledge of carbon steel pipe bend

Author : admin

Update time : 2021-10-11 17:31:19

After the manufacturing of carbon steel bend, it must be 100% sealed and handled carefully. The passivated stainless steel curved surface needs to be wrapped with three layers of canvas to strengthen protection. The temporary accessories and supports of stainless steel elbow are made of stainless steel.
If heavy or bending tools are used, the protective plates must be installed at the position that may contact stainless steel to protect them. These protective plates must be made of stainless steel or lead plate. When transporting stainless steel bends, they must be placed in a closed box, the open box must be covered with canvas, and the end of the pipe must be blocked with plastic, Stainless steel bends shall not be affected by carbon steel and other impurities. They shall be stored in a dry room as far as possible to avoid the combination of moisture, dust, iron and other pollutants.
The above are the problems that should be paid attention to during the storage of stainless steel bends. Let's take a look at the advantages of stainless steel bends. The stainless steel bends are mirror polished. The products are connected by seamless welding technology, and the welds are flat, which can meet the strict requirements of customers for wire drawing and bending. Compared with round pipes, stainless steel bends usually have large moment of inertia and section modulus, It has strong bending and torsional strength, which can greatly reduce the structural weight and save steel.

Previous : Specification for carbon steel flanges

Next : Influence of lubrication on product quality during forming of carbon steel bend

Shengtian Group successfully participated in the Russian Oil and Gas Exhibition

Apr .23.2024

From April 15th to 18th, 2024, the Oil and Gas Exhibition will be held in Moscow, the capital of Russia.

Production process of stainless steel tees

Apr .19.2024

ASTM B16.5 ASME A403 WP 304 Butt Weld Equal Stainless Steel Equal Tees are fittings used for branch pipes, used to manufacture seamless steel pipe tees.

ASME B16.9 Stainless Steel Elbow Dimension

Apr .17.2024

We are high quality 90 Degree ASME B16.9 ASME A403 WP304 4 Inch Butt Weld Stainless Steel Elbow manufacturer in China.

The processing method of flanges

Apr .15.2024

Forging method. Machining flanges through forging can be divided into two types: free forging and die forging. Free forging involves compression processing under a forging press